Merak E750 EVO F3C : MK75200

Merak E750 EVO F3C : MK75200

• The production standard of body metal parts is strict and high precision.
• The new Zoomlion design enhances the following degree and wind resistance of the body.
• The pitch control pull rod adopts titanium alloy positive and negative tooth adjustable pull rod with high strength and accurate pitch.
• The newly designed swashplate is supported by two thin-walled bearings, and the side is equipped with a locking structure, which can adjust and control the virtual position of the swashplate at any time.
• The main gear and tail transmission gear adopt helical teeth with a slope of 20 degrees, which makes the bite more smooth, has obvious mute effect and increases the service life of the gear.
• The diameter of the tail sliding sleeve is increased, the wall thickness is increased, the fracture prevention is also more wear-resistant.
• The tail rudder control rod adopts 4mm carbon fiber rod to increase control accuracy and reduce resonance, which is reliable and durable.
• The design of adjustable rocker arm and double push connecting rod makes the adjustment of tilt plate easy, reduces the control virtual position and reduces the wear of steering gear.
• All aluminum alloy lightweight tripod, high strength and good toughness!
• The third generation of integrated adhesive side plate structure supports battery stacking and one-way installation, and there are 5 installation positions to choose, which are used to adjust the center of gravity position of the body and obtain different flight characteristics.
• The lightweight metal parts of the whole machine have a take-off weight of only 5.3kg(Including body).
• Standard metal mounting base of tripod is provided to increase the torsional performance and support force of lower side plate.
• The main gear seat and one-way bearing seat are integrated, and the diameter of the gear seat is increased, so the gear concentricity is higher and more durable.
• The center seat of the tail transmission gear is enlarged to increase the support force of the tail gear.
• Metal motor fixing base mounting plate.
• Upgrade the 20t synchronous belt drive wheel.
• The new tail wave box assembly and tail rotor clamp, and the tail fork adopts double push slider structure to bring higher control accuracy..
• Design of receiver mounting plate with adjustable mounting angle.