0 item(s)
View cart
You have no items in your shopping cart.
Align BeastX Microbeast PLUS Flybarless System : HEGBP301T
Align BeastX Microbeast PLUS Flybarless System : HEGBP301TAlign supplied version of the popular Microbeast PLUS Flybarless System from BeastX. As supplied in many Align combo's.MICROBEAST PLUS is based on the...
HEGBP301T£144.99
Align DS655 Digital Servo : HSD65501T
Ultra-speed servo for instant tail control reaction. (0.05sec/60 deg).Ultra Performance Coreless Motor with fast reaction and low current.Hardened high strength superalloy gears that increase the lifetime.Aluminum alloy mid case construction...
HSD65501T£62.99
Align DS615 Digital Servo : HSD61501T
Higher performance superiority, increased output torque, faster reaction time, resulting in higher holding power on those momentary pauses in between 3D maneuvers, providing precise control feel.Coreless Motor Design for fast...
HSD61501T£60.89
SKID PIPE : HN7049T
Use for T-REX 700 Nitro Pro.Skid pipe x 2(Φ9x325mm)Skid pipe end cap x 4
HN7049T£6.56
600/700DFC Ball Link : H60246T
Use for T-REX 600.700DFC/700N/700N 3G/700E/700E 3G/700 F3C.700N Elevator ball link x 8
H60246T£3.68
Align T-Rex 700/800 M1 Torque Tube Front Drive Gear Set/23T : H70G001NXT
Use for T-REX 700E/800E. Must be used with H70G012XXT due to the slant being the opposite direction. Brand new low drive gear ratio with high strength and wear resistance,effectively reduce...
H70G001NXT£14.69
Torque Tube Rear Drive Gear Set - Trex 700/800 : HN7042BT
Torque Tube Rear Drive Gear Set - Trex 700/800 : HN7042BTUse for T-REX 800/700 Nitro Pro/700E.Must use with 700 Metal Tail Rotor Holder (H70T001BXT).Utilizes newly developed, highest spec and superior...
HN7042BT£17.33
Align Hook & Loop Fastening Tape (2) : H60054
Align Hook & Loop Fastening Tape (2) : H60054Hook & Loop fastening tape x 2(20x345mm)
H60054£4.73
SKID PIPE - SILVER 700 : HN7049QFT
6061-T6 Aluminum alloy material.Use for T-REX 700.Skid pipe x 2(Φ9x325mm)Skid pipe end cap x 4
HN7049QFT£6.56
Align T-Rex 700 DFC Main Shaft (H70093AT)
Use for T-REX 700DFC (H70089A).700DFC Main shaft x 2Socket collar screw x 1(M4x24mm)Socket buton head collar screw x 1(M4x27mm)Socket screw x 2(M4x8mm)M4 nut x 2Main shaft spacer(0.8) × 1(Φ12xΦ16x0.8mm)Main shaft...
H70093T£19.43
Align T-Rex 700 Tail Boom Support Rods : H7NT007XXT
Use for 700X/700L/700N/700XN/700E/760X/800E.Carbon fibre material.Specification:700XN Tail boom Supports × 2 (Φ3xΦ7.95x550mm)M4 Washer × 4 (F4xF8×1mm)Socket Screw x 2 (M4x12mm)Socket Screw x 2 (M4x14mm)
H7NT007XXT£16.28
New Main Rotor Holders : HN7116T
Suitable for T-REX 700E / 700N. 6061-T6 Aluminum alloy material and CNC processed.Metal Main rotor holder x 2MR6800ZZ Bearing x 4(Φ10xΦ19x5mm)Washer x 4Socket collar screw x 2(M5x32mm)M5 nut x 2Bearing...
HN7116T£51.44
Socket Button Head Collar Screw (HN6015BT)
Socket button head collar screw x 16 (M3x8mm)
HN6015£7.34
T-Rex 800E Torque Tube : H80T011XXT
Use for 800E.Torque tube x 1(F8x918mm)Bearing MR148ZZ x 2(F8xF14x4mm)Torque Tube Bearing Holder x 2
H80T011XXT£22.04
Align T-Rex 700 Tail Rotor Holder (Heavy Duty) : H70T001BXT
Align T-Rex 700 Tail Rotor Holder (Heavy Duty) : H70T001BXTUse for T-REX 700XN/700X/700N/700L/700E/800E.Brand new high rigidity and precise design with high end M4x8 hexagonal screw upgrade. No doubt it grandly...
H70T001BXT£28.34
T-Rex 800E Carbon Fiber Tail Boom Set : H80T005XXT
Use for 800E.3K tail boom x 1(F24x915mm)
H80T005XXT£44.09
Align DS820M High Voltage Brushless Servo : HSD82001T
Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision. Brand new high voltage brushless servo...
HSD82001T£129.99
Align Linkage Ball M2.5 : H70Z010AXT
Align Linkage Ball M2.5 : H70Z010AXTUse for T-REX 550X / 600L / 600XN / 650X / 700E / 700L / 700X / 700XN / 760X / 800E?ALIGN E1. Linkage Ball(M2.5x3.5)...
H70Z010AXT£7.34
700DFC Head Dampers : H70096T
Use for T-REX 700DFC.Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.700DFC Head Damper x 4 (F10xF17x7mm)
H70096T£7.34
Align E1 Two-Blade Swashplate (E1/800/700) (HE1H005XXT)
Align E1 Two-Blade Swashplate (E1/800/700) (HE1H005XXT)Suitable for ALIGN E1, T-REX 700/800.Aluminium alloy material.Specification: E1 swashplate x 1 Washer x 3 (Φ2.6xΦ5.8x0.6mm) Socket Button Head Screw x 3 (M2.5x5mm) Bearing(6706ZZ) x...
HE1H005XXT£55.64
Align DS820 High Voltage Brushless Servo : HSD82002T
Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision. Brand new high voltage brushless servo...
HSD82002T£104.99
Align 780mm CF Main Blades (HD780AT)
Use for T-REX 800EThe 780 main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled...
HD780A£124.99
Align M6 Socket Collar Screw : H70Z011XXT
Align M6 Socket Collar Screw : H70Z011XXTFeathering Spindle Bolts.Suitable for TB70 / TN70 / T-REX 700/760/800M6 socket collar screw(M6x16mm) × 6
H70Z011XXT£2.65
Align T-Rex 700-800 Blade Clips : H70H001XXT
Suitable for T-REX 700/800.The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab...
H70H001XXT£7.34
Linkage Ball - C Hardware Bag : HN7080T
Linkage Ball - C Hardware Bag : HN7080TUse for T-REX 550X/700 Nitro Pro.
Linkage ball C(M2x4) x 16(Φ5x9mm)
M2 nut x 6
HN7080T£12.08
Align T-Rex Motor Slant Thread Pinion Gear 12T (L27) : H70G010XXT
Use for T-REX 700E / 800E.Highly enhance structural strength, effectively increase the torsional capability.Must with CNC Slant Thread Main Drive Gear/112T(H70G002AXW) Motor Slant Thread Pinion Gear 12T x 1 (M1/12T)...
H70G010XXT£9.44
Align T-Rex 700FL Linkage Rod (A) Set : H70Z005XXT
Suitable for T-REX 700E/700N/700 F3C/800E.Must use with 700FL Flybarless Rotor Head System(H70H002XXT).700 Elevator ball link x 4(F5xF6x19mm)700EFL Linkage rod A x 2(M3x56mm)Linkage rod holder x 4(F6xF4.85x3mm)
H70Z005XXT£13.64
Align T-Rex 700FL Main Shaft Set : H70H003XXT
Align T-Rex 700FL Main Shaft Set : H70H003XXTMust use with 700FL Flybarless Rotor Head System (H70H002XXW)700 Newly Main Rotor Holder (HN7116T)Feathering Shaft (HN7025T).Use for 700/700N/700 F3C/800E.Accessories Included :700EFL Main shaft...
H70H003XXT£19.94
Align 102T M1 Helical Autorotation Tail Drive Gear Set : H70G012XXT
Use for T-REX 700X/700E/800E. Must be used with H70G001NXT front torque tube drive gears due to the slant being the opposite direction. Brand new low drive gear ratio with high strength and...
H70G012XXT£26.24
Align T-Rex 700/800 Motor Slant Thread Pinion Gear 13T (L27) : H70G011XXT
Suitable for T-REX 700/800.Highly enhance structural strength, effectively increase the torsional capability.Motor Slant Thread Pinion Gear 13T x 1M4 set screw x 2(M4 x 4mm)
H70G011XXT£9.44
Align CNC Slant Thread Main Drive Gear/112T - 13.5mm Thick : H70G002AXT
Suitable for T-REX 700E / 800E.Highly enhance structural strength, effectively increase the torsional capability.Must with Motor Slant Thread Pinion Gear 12T(H70062A)CNC Slant Thread Main drive gear(112T) x 1
H70G002AXT£26.78
Align DS825 High Voltage Brushless Servo : HSD82502T
Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.Rudder servo with 0.02sec/60° ultra high speed...
HSD82502T£104.99
Align T-Rex Torque Tube Front Drive Gear Set 19T/M1.25 (HE1G005XXT)
Align T-Rex Torque Tube Front Drive Gear Set 19T/M1.25 (HE1G005XXT) Use for ALIGN E1, T-REX 700/760/800. New upgrade high-strength drive gear for E1/ T-REX 800/760/700. The new torque tube umbrella...
HE1G005XXT£22.04
T-Rex 800E Tail Control Guide : H80T009XXT
Suitable for T-REX 800E.Tail Control Guide × 4(F24xF28.5x48.1mm)Socket button head self tapping screw × 4(T4x10mm)
H80T009XXT£8.93
Align DS825M High Voltage Brushless Servo
Designed specifically for helicopters,utilizes brushless motor for fast speed, high torque and super efficiency reaction, allowing helicopter to perform with faster and higher precision.Rudder servo with 0.02sec/60° ultra high speed...
HSD82501T£129.99
Align 800MX Brushless Motor (440KV) RCM-BL800MX : HML80M04T
To meet the power and torque requirements of enthusiasts, the high output 800MX motor was born in Align’s R&D lab. With dramatic increase in torque and power output, capable of...
HML80M04T£174.99
Align 115 Carbon Fibre Tail Blade : HQ1150CT
Align 115 Carbon Fibre Tail Blade : HQ1150CTSuitable for T-REX 800.3K carbon fibre made, new light-weight design, improve the efficiency of tail blade to make more precision on tail rudder...
HQ1150CT£36.74
Align T-Rex 760X F3C Main Rotor Holder Arm (2) : H76H002XXT
Use for T-REX 760X.6061-T6 Aluminum alloy material and CNC processed.New F3C holder arm effectively doubling the flight stability, and the excellent fine control accuracy; not only in the static flight...
H76H002XXT£26.24
Align T-Rex 700E 104T M1 Autorotation tail drive gear set : H70G007XXT
Gear Ratio 1:4.95Use for T-REX 700 Nitro.Must with H7NG001BXW, M1 Torque Tube Front Drive Gear Set/21T.Use for T-REX 700X/700L/700E/800E.Must with H70G001BXW, M1 Torque Tube Front Drive Gear Set/22T700N 104T M1...
H70G007XXT£19.69
Align 700FL Main Rotor Holder Arm (2) : H70H006XXT
Align 700FL Main Rotor Holder Arm (2) : H70H006XXTSuitable for T-REX 700E/700N/700 F3C/800E.Must with 700FL Flybarless Rotor Head System(H70H002XXW). 700FL Main rotor holder arm x 2 Linkage ball B(M3x4) x...
H70H006XXT£19.69
Align T-Rex 760X 3D Main Rotor Holder Arm (2) : H76H001XXT
** NOTE THIS REPLACES ITEM H70H006XXT **Use for T-REX 760X.6061-T6 Aluminum alloy material and CNC processed.The 3D holder arm has excellent rigidity and toughness, suitable for extreme 3D flight, features...
H76H001XXT£26.24
Align T-Rex 700 DFC Main Rotor Holder Arm : H70095T
Suitable for T-REX700DFC (H70089A).6061-T6 Aluminium alloy material and CNC processed.Metal Main rotor holder arm x 2M3 CNC socket collar screw x 2(M3x24mm)Socket collar screw x 4(M3x6mm)Washer(Φ3xΦ4.8x0.3mm) x 2Weight:20g
H70095T£19.94
Align T-Rex 700 DFC Main Rotor Grip Link Arm Set : H70092T
Suitable for T-REX 700DFC (H70089A).6061-T6 Aluminium alloy material and CNC processed.700DFC Main rotor grip arm integrated control link x 2700DFC Collar x 2683ZZ Bearing(Φ3xΦ7x3mm) x 4700DFC Linkage rod A(M3x14mm) x...
H70092T£22.04
METAL BATTERY MOUNT - 700E (2) : H70085T
Use for T-REX 700E / 700E F3C V1 V2.6061-T6 Aluminum alloy material and CNC processed.Metal battery mount x 2Hook & Loop Fastening Tape x 4Hook and Loop Tape(M)x 4Hook and...
H70085T£59.84
