Get rid of the flybar and go to an entire new dimension of flying! The VBar system is an electronic gyro system for three axes, including a tail rotor gyro.

New 5.2 Software for outstanding flight performance
Easy start with programming assistant
VBar can be used in conjunction with one or two satellite receivers
Programming via PC/Control Panel

The New VBar Silverline uses a new sensor technology, which uses three sensor elements that are the only ones on the market specially designed and adapted for the use in real model helicopters.

The Sensors are manufactured by the Company Silicon Sensings and use a oscillating ring structure for the detection of rates in opposite to the known sensors that have only one or two oscillating masses.

The symmetric design and 8 separate sensing devices inside the sensor give a perfect balance of the system, which enables to detect smallest rotational movements even in high vibration environments. This gives us the advantage to mount the sensor very stiff at the frame, so it detects smallest movements very quick without getting disturbed by the vibrations.

Every heli produces lots of vibrations if it is rotates quickly around the axes. This is fairly normal but can create a certain drift in the other sensor elements which gives a slight cross coupling through the axes. The new sensor gives advantages not only in nitros or turbine helis, but on dynamically moved 3D helis as well!

The result is a very easy to use sensor with nice hovering performance, best possible vibration resistance and a superior dynamic behaviour if flown in hard 3D.

Specifications
Dimensions : Main unit 45,5 x 33,8 x 16 mm Gyro sensor 28,5 x 28,5 x 10 mm
Weight : Main unit 15,9 g Gyro sensor 10,5 g

Content
USB cable : 1,8 m
Patch cable : Patch cable for Standard Receiver
mounting pad : yes
main unit : yes
Gyro sensor : yes
Manual : printed manual
Software : CD with drivers and PC-Software