0 item(s)
View cart
You have no items in your shopping cart.
Hyperion 5-Pin Pack-side Balance Connector, HP-style for 4S : HP-EOSLBA-MC-P4
Hyperion 5-Pin Pack-side Balance ConnectorHP-style for 4SUn-assembled (4 pcs)LOOSE Balance CONNECTORS - PACK SIDEMALE housing4 setsP6 ALSO FITS LBA10 and EOS Balancer sockets.These connectors come attached to Hyperion Lithium Battery...
HP-EOSLBA-MC-P4
Hyperion Female Adapter Side for 6S : HP-EOSLBA-MC-A6
Hyperion 7-Pin Charger side (Female) Balance Connector, HP-style for 6S, These are the connectors that MATE to PolyQuest, E-Tec, and Hyperion Lithium Battery Packs. Use them to wire up a...
HP-EOSLBA-MC-A6£1.20
Align CH150 Li-Po Charger - T-Rex 150 : HEC15001T
1.Voltage balancing charging suitable for 2S 7.4V.2.Suitable for DC 9V~12V power input.3.Auto-detected charge status display.4.Reverse polarity (warning beep) and short protection built in.NOTE:1.Do not leave the charger is operating unattended...
HEC15001T£18.89
Align CH240 Li-Po Charger - M424 Quad : HEC24001T
1.Voltage balancing charging suitable for 1S (3.7V).2.Suitable for DC 5V power input.3.Auto-detected charge status display.NOTE:1.Do not leave the charger is operating unattended as it may cause a fire.2.If the battery...
HEC24001T£14.69
Magnet MicroUSB Charge/Data Cable & Adapt: iX12/20 : SPMA3067
Magnet MicroUSB Charge/Data Cable & Adapt: iX12/20
SPMA3067£19.99
Align USB Cable : HEP00003T
Suitable for HEC10001 CH100 Li-po Charger.Suitable for HER00001 AT 100 Transmitter set.
HEP00003T£7.09
CH100 TWIN LIPO CHARGER - TREX 100 : HEC10001T
Use for T-REX 100S/100X.Charger x 1USB Cable x 1
HEC10001T£18.38
1S USB Li-Po Charger 500mAh High Current UMX : EFLC1013
1S USB Li-Po Charger 500mAh High Current UMX
EFLC1013£19.99
Voltz 7 to 11 Pin Balancing Cable : VT-A-711
Use this cable to connect your Voltz balancing board to your Voltz charger, suitable for the Voltz 6250 charger.
VT-A-711
IC5 Device Charge Lead 6": 10 AWG / 4mm Bullet : SPMXCA504
IC5 Device Charge Lead 6": 10 AWG / 4mm Bullet
SPMXCA504£13.99
Spektrum Tx Battery NiMh/LiPo Charge Adapter : SPM6834
Spektrum Tx Battery NiMh/LiPo Charge Adapter
SPM6834£7.50
Spektrum S1500 DC Smart Charger 1 x 500W : SPMXC1050
Smart Technology OverviewSpektrum Smart technology is about offering a higher connection to your hobby. It's a connection that puts you in complete control, makes you more aware and more confident...
SPMXC1050£144.99
Spektrum Smart Charger USB Updater Cable / Link : SPMXCA100
Spektrum Smart Charger USB Updater Cable / Link
SPMXCA100£11.99
Spektrum Smart S1200 DC Charger, 1x200W : SPMXC1000
The Spektrum&trade: S1200 Smart Charger is the first DC smart charger to feature Spektrum Smart Charging technology. Small and portable, this 200W charger features the brand new Spektrum IC3&trade: connector...
SPMXC1000£84.99
Power Peak Slow Fly Charger : RB8195
Handy Quick charger for 6-7 celled batteries. The device is optimised for NC/NiMH batteries with a capacity of about 200 - 1000 mAh. The end of the fast charging is...
RB8195
Charger Lead MCP-X, E-Flite 3D heli type single cell : OV-2251
Use your regular Lipo charger to charge your single cell, lead connects to battery and converts small minium plug into regular JST type RED plug for easy connection to your...
OV-2251£1.49
Optipower LiPo Bag : OPR-LIPOBAG
Optipower LiPo Bag : OPR-LIPOBAGOptipower LiPo Bag for improved safety during charging of Lithium Cells, A fire resistant bag for use with lithium cells.The bag will help to minimise the...
OPR-LIPOBAG£8.99
Charge Lead - Gold Connectors - 4mm to 4mm and 2mm : O-XLD4-4/2
Charge Lead - Gold Connectors - 4mm to 4mm and 2mm : O-XLD4-4/24mm standard charger connectors, but with 2mm and 4mm charge outputs.
O-XLD4-4/2
SkyRC MC6 Micro LiPo Charger (OV-3347)
SkyRC MC6 Micro LiPo Charger (OV-3347)The SkyRC MC6 charger is designed to be connected to a 5V/2.1amp USB port.It features 6 charge outputs and may be used to check the...
OV-3347£16.99
SkyRC D400 400Watt 20Amp Output AC/DC Charger (OV-3202)
SkyRC D400 400Watt 20Amp Output AC/DC Charger (OV-3202)The SKYRC D400 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports...
OV-3202£214.99
Charge Cable - GO3 (T-Rex 3mm) : RB4114
Ready-made charging cable, length 100 cm. One side Banana, other side 3 mm gold contacts.
RB4114£7.99
Voltage Sensor Cable 4S : RB4027
Single-cell connecting leads for Lithium batteries with the JST-EHR plug system. For making up your own Lithium batteries.Matches robbe battery chargers and equalizers. Compatible with Graupner and Kokam.
RB4027£2.20
Charge Lead : 4mm~Spek/JR Rx : LGL-CLJRX
This charge lead is used to connect a JR/Spektrum type receiver battery to a standard 4mm charger output.
LGL-CLJRX£4.49
Microheli Fast Charging Cable 6 in 1 - Type JST-XH 3S : MH-6JST-XH-4
Microheli Fast Charging Cable 6 in 1 - Type JST-XH 3S
MH-6JST-XH-4
Parallel Charging Lead for JST-PHR-2 (Blade MCPX) Connectors : IC-WMCPX
Parallel Charging Lead for JST-PHR-2 (Blade MCPX) Connectors
IC-WMCPX£7.99
T-Plug X6 Parallel Cable With 5 Caps Silicone Wire : IC-W226
T-Plug X6 Parallel Cable With 5 Caps Silicone Wire
IC-W226£9.99
Parallel Charger Adaptor Board for TP Battery : IC-ADPT-TP
Parallel Charger Adaptor Board for TP Battery for Deans/T-Type Connectors
IC-ADPT-TP
EOS LBA10 Balance Harness JST XH, 5S-pack, Std : HP-EOSLBA10-XH-H5S
Harness for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-XH type, mounted on quality PCB board. , This cable do NOT fit LBA6.
HP-EOSLBA10-XH-H5S
EOS LBA10 Balance Harness JST EH, 5S-pack, Std : HP-EOSLBA10-EH-H5S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-EH type, mounted on quality PCB board. , This cable do NOT fit LBA6
HP-EOSLBA10-EH-H5S
Battery adapter 2S-6S MultiAdapter PQ, NO WIRES : HP-EOSLBA-26HP-B
LBA10 /BC 2S-6S MultiAdapter HP/PQNO WIRESHP: fit HYPERION, POLYQUEST, PolyQ, ETEC, and some other brand packs.
HP-EOSLBA-26HP-B
EOS LBA10 Balance Harness JST XH, 2S-pack, Std : HP-EOSLBA10-XH-H2S
Harness for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-XH type, mounted on quality PCB board. , This cable do NOT fit LBA6.
HP-EOSLBA10-XH-H2S
Lba10 /Bc 2s-6s MultiAdapter Tp/Fp, No Wires : HP-EOSLBA-26TP-B
TP: fit recent THUNDERPOWER and all FLIGHTPOWER* packs from 2S to 6S
HP-EOSLBA-26TP-B
EOS LBA10 Balance Harness JST EH, 2S-pack, Std : HP-EOSLBA10-EH-H2S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-EH type, mounted on quality PCB board. , This cable do NOT fit LBA6
HP-EOSLBA10-EH-H2S
Hyperion Balance Converter 5S Hyperion Lipo/LiFe to EH conn : HP-EOSLBA-05HPEH
Hyperion Balance Converter - 5S Hyperion Lipo/LiFe to EH connector
HP-EOSLBA-05HPEH
Hyperion Balance Converter - 6S Hyperion Lipo/LiFe to EH : HP-EOSLBA-06HPEH
Hyperion Balance Converter - 6S Hyperion Lipo/LiFe to EH connector
HP-EOSLBA-06HPEH
EOS LBA10 Balance Harness JST EH, 4S-pack, Std : HP-EOSLBA10-EH-H4S
Harnesses for LBA 10 to balance NON-HYPERION-TYPE lithium packs from other makers. Pack-side connector is JST-EH type, mounted on quality PCB board. , This cable do NOT fit LBA6
HP-EOSLBA10-EH-H4S
Hyperion PC adapter cable for EOS xx NET/DUO chargers : HP-EOS06-PCCBL
Hyperion PC adapter cable for EOS xx NET/DUO chargersCannot be used alone - must be combined with HP-TI-PRGUSBTo connect a Hyperion Balance Charger with Data Port to a PC, you...
HP-EOS06-PCCBL
Hyperion Balance Converter - 3S Hyperion Lipo/LiFe to EH con : HP-EOSLBA-03HPEH
Hyperion Balance Converter - 3S Hyperion Lipo/LiFe to EH connector
HP-EOSLBA-03HPEH
Align RCC-4SD Balance Charger (HEC4SD01T)
1.Suitable for DC 10V~17V power input.2.Apply to 3.7V 2-4 cell Li-polymer/Li-ion batteries.3.Can be used as battery detector to detect 2~4 cell battery defects, shorts or others.4.Can be used as portable...
HEC4SD01T
