Align APS-M Multicopter Control Unit : HEGAPS04T

Suitable for M480L / M690L or 4 rotors +, 4 rotors X, 6 rotors +, 6 rotors X...Multicopters

Brand new APS-M multicopter auto pilot system with superior performance through cutting edge IT technologies, utilizing high precision sensors and modern system control subroutines.

With higher performance, precision sensors and superior reliability platform.

Equipped with automatic return home function with remote activation ability from R/C transmitter. When RC transmitter signal is lost, multicopter will automatically fly back to home position.

APS-M provides 3 intelligent flight modes: CFO, HCL, and POI.

Provides real-time OSD flight data output function.

RoHS certified.

Compatible with PC and Bluetooth interface, could be easily adjust flight parameter and update firmware at any time.

Also fully support with Futaba, Spektrum and JR S. BUS/S.BUS and DSM2/DSMX/DSMJ/DMSS system.

Input Voltage:DC4.5V~8.4V.

Operating Current Consumption:<250mA@ 4.8V.

Operating Frequency:400H

Operating Temperature:-20° ~ 65°C(-4° ~ 149°F)

Hovering Precision (Depending on Satellite Status): Horizontal ±1m, Vertical ±1m

Highest Flight Speed: Horizontal 15m/sec, Vertical 6m/sec

Maximum Altitude Restriction: 700m(2297ft) above the takeoff point

Maximum Angular Speed: ALE 115° /sec, ELE 115ð /sec, RUD 145° /sec

Maximum Tilting Angle: 30 degrees

Supports External Peripherals: G2 / G3 Gimbal

OSD+FPV Video Transmitter

Supports Multicopter Configurations: 4 rotors +, 4 rotors X, 6 rotors +, 6 rotors X, 8 rotors +, 8 rotors X

Dimension/Weight: 49x34.3x20mm / 21.27g

Content:

APS-M Multicopter Control Unit x 1

APS-M Signal Wire Set x1 (around 280mm)x 1

APS-M Signal Wire x 3

External Status LED x 1

Multicopter GPS Sensor x 1

USB Cable Set x 1

External Status LED Sided Mounting Tape x 2

APS-M Sided Mounting Tape x 2

GPS Sided Mounting Tape x 2