Midland Helicopters Ltd VarUpgrades

Worldwide model helicopters and parts

Midland Helicopters UK | ModelHelicopters.co.uk

World Wide Service on the Internet

Largest Stocks in the UK - probably Europe too

Sitemap

Tel: +44 (0) 1455 637762

Fax +44 (0) 1455 630890

In the Uk dial 07000 4 Helicopter

Home

Items Ordered:, Cart Value:

Quick search:





	CLP0001 : Flybar Mixers (2) - Eolo (Heliup) Especially designed for 3D demanding pilots. This mixers allow for a +10° -10° without binding. The three holes allow for different setups, from standard to 3D. No flex and double ball bearing. Parts shown in pics can change without notice. Note they are anodised blue, not silver as shown in photo. Price: £16.98 £19.95 Including VAT at 17.5%


	CLP0002 : Paddle Holders (2) - Eolo (Heliup) Light weight paddle holders, much faster cyclic, improved roll rate. Best if used with KS paddles or standard lightened. Parts shown in pics can change without notice. These are anodised Blue, not silver as shown in photo. Price: £8.81 £10.35 Including VAT at 17.5%


	CLP0003 : Twin Tail Boom Support Kit - Eolo (Heliup) Fully CNC and carbon tail boom support with pushrod holder. This set allows for a much more rigid tail, resulting in a better overall working tail. The tail pushrod guide doesn't allow the rod to pop off the standard guide anymore. Parts shown in pics can change without notice. Price: £18.71 £21.98 Including VAT at 17.5%


	CLP0005 : 3rd Bearing Block Upgrade - Robbe Eolo The 3rd bearing mod from 'Heli-Up' eliminates any flex in the drive train, resulting in a much more rigid frame and smooth power transmission. The newly designed anti-rotation arm allows maximum swash plate movement. With this mod the main mast is lowered by 5mm resulting in a more reactive heli. This set includes the 3rd bearing and installation hardware plus a replacement anti-rotation arm for the head. Parts shown in pics can change without notice. Price: £18.94 £22.25 Including VAT at 17.5%


	CLP0007 : Tail Lever Upgrade - Eolo (Heliup) Fully CNC tail actuator leverage, expecially designed for standard tail gearbox (double ball bearing) Built in delrin bushing for ultimate durability and precision. It remove virtually all of the slop from tail linkages. Parts shown in pics can change without notice. Price: £16.16 £18.99 Including VAT at 17.5%


	CLP0008 : Servo Holder - Eolo (Heliup) Fully Alu CNC servo holder keeps servos in place securely for ultimate flight precision. The servo holder features a longer hole to allow the servo horn to work without any binding. Current Stock is Blue Parts shown in pics can change without notice. Price: £20.42 £23.99 Including VAT at 17.5%


	CLP0009 : Tail Drive Wire & Bearing Upgrade - Eolo (Heliup) Fully Ball Bearing drive wire set, 3 delrin bushing and 3 ball bearings for ultimate T\R drive wire smoothness. Parts shown in pics can change without notice. Price: £15.11 £17.75 Including VAT at 17.5%


	CLP0010 : Tail Gearbox Upgrade - Eolo (Heliup) Fully CNC drop in replacement for the tail gearbox assembly. Ultimate precision no flexing extreme rigidity and smoothness. Current Stock is Blue Anodised Price: £38.26 £44.96 Including VAT at 17.5%


	CLP0022 : Tail Fin & Servo Mount - Hornet II (Heliup) Fully CNC tail servo holder, no more glueing in place just bolt it on and fly, no chance of coming unglued in flight. It fits HS-50 servo (Not Included). CF fin included in the kit. Parts shown in pics can change without notice. Price: £12.76 £14.99 Including VAT at 17.5%


	CLP0023 : Tail Plane & Ali Clamp - Hornet II (Heliup) Fully CNC tail tail clamp, no more glueing in place just bolt it on and fly, no chance of coming unglued in flight. CF fin included in the kit. Anodised Blue. Parts shown in pics can change without notice. Price: £12.76 £14.99 Including VAT at 17.5%


	CLP0025 : Ali Ball Bearing Tail Grips - Hornet II (Heliup) Fully CNC ball bearing tail grips. Drop in replacement for the tail rotor hub blade grips, exceptionally smooth. 2 bearings in each grip. Anodised Blue. Parts shown in pics can change without notice. Price: £16.16 £18.99 Including VAT at 17.5%


	CLP0026 : Autorotation Unit - Hornet I/II (Heliup) Fully CNC Autorotation unit, super smooth and strong. We provide the ring in pic as a guide to make holes in the main gear, with the ring is fast and precise to prepare your autorotation gear. Parts shown in pics can change without notice. REQUIRES THE WHITE AUTOROTAIONAL MAIN GEAR (part no. MS-E112) Price: £21.23 £24.95 Including VAT at 17.5%


	CLP0027 : Ali Head Block - Hornet II (Heliup) Hornet 2 Aluminium Head Block Price: £11.91 £13.99 Including VAT at 17.5%


	CLP0028 : Ali Pivot Support - Hornet II (Heliup) Hornet 2 Pivot Support. Anodised blue Price: £8.50 £9.99 Including VAT at 17.5%


	CLP0029 : Ali Anti Rotation Unit - Hornet II (Heliup) Hornet 2 Aluminium Anti Rotational Unit. Anodised Blue Price: £7.48 £8.79 Including VAT at 17.5%


	CLP0041 : Carbon Horizontal Plane - Piccolo Carbon Fibre Vertical stabilsier fin with anodised aluminium bracket Price: £13.57 £15.94 Including VAT at 17.5%


	CLP0080 : Tail Servo Mount + Clamp + Carbon Rod - Zoom 400 Precision made CNC alum parts, includes all hardware. This boom clamp helps secure boom for increased gyro function, and acts as a push rod guide , CNC alum servo mounts holds servo more secure for a ZERO slop. TR linkage CF rod included with links and balls. Anodised Blue. Select type of tailboom this item is to be used with below. Price: £21.27 £24.99 Including VAT at 17.5%
	Select_Boom_Size

	CLP0081 : Carbon Fibre Boom Support Kit - Zoom 400 CF Boom Supports, includes CF rods, CNC machined alum ends and hardware. These ends securely BOLT to your heli, rather than relying on links and balls that can flex. With this boom support set you will see an increased gyro gain used in conjuction with Heliup CLP0080 cnc alum.Boom clamp. this will give you the stiffest tail support for Max Gyro function Price: £9.35 £10.99 Including VAT at 17.5%


	CLP0082 : Carbon Fibre Vertical Fin + Clamp - Zoom 400 Carbon Fibre 3D fin & aluminium machined clamp for tail boom. Select for what type of boom you have this item to fit to below. Price: £16.16 £18.99 Including VAT at 17.5%
	Select_Tailboom_type

	CLP0083 : Carbon Fibre Horizontal Tail Plane - Zoom 400 Carbon Fibre 3D Tail Plane for use with the Zoom 400. Price: £7.65 £8.99 Including VAT at 17.5%


	CLP0084 : BB Mixers + BB Washout - Zoom 400 This set replaces the stock plastic parts and Z bends with precision CNC Ball bearing CNC alum parts.These CNC machined parts help eliminate any slop and makes your zoom fly with far more acuracy. Price: £38.29 £44.99 Including VAT at 17.5%


	CLP0085 : Belt Drive Conversion Kit - Zoom 400 New Belt Drive conversion kit for the Protech Zoom 400. This conversion is being produced by Heliup & will include all items required to convert to the belt drive tail, it also modifies the elevator control to being fully ballraced. Click here for Instructions in PDF format Price: £68.08 £79.99 Including VAT at 17.5%


	CLP0086 : BB CNC Elevator Arm - Zoom 400 CNC Machined Anodised Blue Elevator Arm Assembly. This item is included as standard in the belt drive upgrade (CLP0085) Price: £44.25 £51.99 Including VAT at 17.5%


	CLP0087 : BB Aileron Lever - Zoom 400 CNC Machined Anodised Blue BB Aileron Bellcrank. Price: £17.86 £20.99 Including VAT at 17.5%


	CLP0088 : BB Kit for Plastic Elevator Arm - Zoom 400 This kit is to be used for stock zoom 400's that do not have the Heliup CLP0086 CNC elevator arm, this kit helps remove control slop and helps improve control smoothness. Price: £17.86 £20.99 Including VAT at 17.5%


	CLP0089 : Ali Tail Gearbox for Shaft Drive (Zoom 400) T/R Gearbox for shaft driven tail made of CNC Aluminium is extremely precise and strong allows the tail rotor to run true and reduces vibes inducted by flexing of original gearbox. It clamps on the boom securely and will not twist in flight. Select for what type of boom you have this item to fit to below. Price: £27.23 £32.00 Including VAT at 17.5%
	Select Tailboom Type

	CLP0090 : Ali Tail Gearbox for Belt Drive (Zoom 400) T/R Gearbox for belt driven tail made of CNC Aluminium is extremely precise and strong allows the tail rotor to run true and reduces vibes inducted by flexing of original gearbox. It clamps on the boom securely and will not twist in flight. Parts shown in pics can change without notice. This gearbox differs from CLP00089 since it has one more bearing that acts as an additional belt guide on the rear pulley. Select for what type of boom you have this item to fit to below. Price: £29.78 £34.99 Including VAT at 17.5%
	Select Tailboom Type

	CLP0091 : BB Tail Pitch Slider + CNC Lever - Zoom 400 Double BB tail pitch slider and tail actuator arm leverage. This kit improves dramatically tail rotor accuracy and behaviour in flight. Price: £28.08 £32.99 Including VAT at 17.5%
	OUT OF STOCK

	CLP0092 : Carbon Frame Conversion - Zoom 400 Fully CF/Aluminium frame. Every movement is on BB, very stiff construction and great durability. Adjustable servo supports for almost every micro servo on the market. It works with shaft transmission and with our belt kit transmission. Click here for Instruction Manual in PDF format Price: £85.10 £99.99 Including VAT at 17.5%
	Select Carbon Colour Required

	CLP0093 : Ball Bearing Flybar Carrier + Flybar Holder - Zoom 400 BB Flybar carrier, extremely precise and smooth. Makes your heli more precise both in flight and in hovering manouvers Price: £20.42 £23.99 Including VAT at 17.5%


	CLP0120 : BB Aileron Levers (2) - T-Rex Double BB aileron leverages, fully CNC aluminium for ultimate command precision. Price: £19.57 £22.99 Including VAT at 17.5%


	CLP0121 : BB Tail Pitch Slider + CNC BB Lever - T-Rex Double BB tail pitch slider with double BB leverage. Extremely precise and slop free will raise tail performances to next level. A must have for T-Rex owners. Price: £28.08 £32.99 Including VAT at 17.5%


	CLP0122 : CNC Flybar Levers (2) - T-Rex CNC flybar levers are more precise and won't strip as stock ones can after some use. 2 options for positioning of the arm to allow for different cyclic response. Price: £17.86 £20.99 Including VAT at 17.5%


	CLP0123 : Carbon Tail Boom Supports (2) - T-Rex CF Boom Supports, includes CF rods , CNC machined alum ends and hardware Price: £9.35 £10.99 Including VAT at 17.5%
	OUT OF STOCK

	CLP0124 : CNC BB Mixers + CNC Washout - T-Rex Fully BB CNC low mixers + washout. Fully eliminate slop of the original mixers giving more precision and better flight characteristic. No metal/metal or plastic/metal joints. Price: £24.67 £28.99 Including VAT at 17.5%


	CLP0126 : Replacement Plastic Control Fork Replacement Plastic Tail Control Fork (Fits either CLP0091 or CLP0121) Price: £3.19 £3.75 Including VAT at 17.5%


	CLP0127 : Carbon Fin Set - T-Rex/Zoom 3D Carbon Tail Fin Set for the T-Rex/Zoom 400. These are available in either Black/Silver or Blue Carbon. Price: £9.35 £10.99 Including VAT at 17.5%
	Select Colour Required Black Blue Silver

	CLP0128 : CNC Ali Tail Gearbox Complete with BB Belt Guide - T-Rex Fully CNC tail gear case is extremely light and strong. It solves once and for all the twisting problem of the original case. It comes complete with bearings and a new shouldered pulley. Price: £28.08 £32.99 Including VAT at 17.5%


	CLP0129 : CCPM Carbon Frame Conversion - T-Rex CCPM CF 120° frame, very stiff and durable. It utilizes a true 120° servo layout for ultimate flight precision. Due to it's flight characteristic it's an ideal upgrade for the advanced pilot as well as for the beginner. Available in Black, blue and silver CF. Price: £85.10 £99.99 Including VAT at 17.5%
	Select Carbon Colour Required

	CLP0129/3 : Servo/Main Shaft Holders (E-F) Servo/Main Shaft Holders (E-F) Price: £29.78 £34.99 Including VAT at 17.5%


	CLP0130 : BB Complete Upper Mixer Set + Flybar Control Arms - T-Rex Complete CNC and bb upper flybar system. The kit includes the flybar leverages. The central parts is equipped with special bearings to accept standard flybar rods. The kit fixes all the tracking problems you might have on your model Price: £46.80 £54.99 Including VAT at 17.5%


	CLP0132 : Closed Flybar Control Set - T-Rex Fully CNC closed flybar control set. Gives ultimate precision flight characteristics. Price: £21.27 £24.99 Including VAT at 17.5%


	CLP0133 : Main Rotor Hub - T-Rex CNC main rotor hub, complete with double o-rings and washers to adjust damping action. Great for 3D action as well as precision flight. Included in the kit the head button. Price: £20.42 £23.99 Including VAT at 17.5%


	CLP0134 : Main Blade Grips with Thrust Bearings - T-Rex CNC main blade grips. Each grip is held in place by 4 ball bearings, 3 radial and 1 thrust bearing. The thrust bearing allows the grip to operate smoothly even under strong centrifugal forces. Helps the heli track perfectly Price: £22.97 £26.99 Including VAT at 17.5%
	OUT OF STOCK

	CLP0135 : Alu CNC Tail Blade Grips - T-Rex Cnc aluminium tail blade grips feature double ball bearings. Included in the kit are the balls to connect the grips to the slider. Price: £17.86 £20.99 Including VAT at 17.5%


	Strong Landing Gear - Regular or Low Profile (T-Rex) Ultra-Strong Undercarriage Cross Struts for the T-Rex 450X/XL/SE - Black (Pair) There are 2 types available, regular which is the same dimensions as the original u/c, or low profile Price: £6.80 £7.99 Including VAT at 17.5%
	Select Profile Required

	CLP0143 : Aluminium SDS Rotor Hub - T-Rex 450X/XL/SE New SDS Head. Adjustable dampening for great performance in normal flight and 3D. Incredibly smooth gives the heli a great locked feel. Price: £29.78 £34.99 Including VAT at 17.5%


	CLP0149 : Adjustable Paddles - T-Rex 450 (Various Colours) "Adjustable Paddles" for the T-Rex 450. Made out of the same material of the Landing Gear, these new paddles are the hot ticket for 3D pilots as well as beginners, due to their adjustability. Price: £5.91 £6.94 Including VAT at 17.5%
	Select Colour Required

Sitemap

Midland Helicopters Ltd
Newton Road, Harrowbrook Industrial Estate, Hinckley, Leicestershire, LE10 3DS. England
Tel: +44 (0) 1455 637762 Fax: +44 (0) 1455 630890
We have the largest stocks of helicopters & spares in the whole of the UK!!!

Shop, Mail Order and Phone Opening Times
Monday, Tuesday, Friday 1:30 pm - 5:30 pm. Thursday 1:30 pm - 8:00 pm
Saturday 12:00 pm - 5:00 pm. Wednesday, Sunday - Closed
Mail Order Department operates Monday to Friday
Phone lines open Mon, Tue, Fri 9:00 am to 5:30 pm, Thu 9: am to 8 pm