HE50H09 : Align RCE-G600 Governor Engine Governor for use on almost all Glow Models with the ability to fit the sensor magnets to the cooling fan. Compact design, easy use, simple setting with great speed control performance. Speed resolution: 0.1RPM. Speed stability accuracy: within 1%(Steady State). Not compatible with Futaba S9251/S9256 and other 760µs servos. Click here for Instruction Manual Price: £34.77 £39.99 Including VAT at 15%
HE50H22 : RCE Governor Sensor & Magnets Sensor wire length:250mm, Accessories: RPM Magnet x 2(F4x1.5mm) Price: £6.08 £6.99 Including VAT at 15%
YEI-ATG1 : CY ACTIVE THROTTLE GOVERNOR (NEW VERSION 3) We are proud to introduce a new throttle governor developed and flown by Multi-time World Champion Curtis Youngblood. This Dual Mode Governor features simply push button setup, rpm indication lights, and a small slim case. No other pieces needed. Price: £56.51 £64.99 Including VAT at 15%
YEI-ATG-S : ATG REPLACEMENT SENSOR PACK This item includes the ATG Sensor, one (1) magnet, one (1) heat shrink tubing and two (2) zip ties. Price: £9.56 £10.99 Including VAT at 15%
TT8030 : Thunder Tiger Governor Zero Alpha The Zero Alpha is a state of the art digital engine speed governor for model helicopters which automatically monitors engine speed & maintains constant RPM by using an active integral control algorithm. It not only works very well in all maneuvors but also has a very user-friendly interface & easy setup. It is designed to govern the engine rpm between 10,500-21,000rpm Click here to download Manual (PDF Format) Price: £39.12 £44.99 Including VAT at 15%
TTAQ0820 : Governor Accessory for Zero Alpha Replacement Sensor/mount/magnets for the Thunder Tiger Zero Alpha. Price: £6.80 £7.82 Including VAT at 15%
CSM0050 : CSM CARBSMART This item is set to be an essential accessory to anybody using a glow engine in their helicopter. It automatically controls the fuel mixture (Via an extra servo/Not included) by monitoring the cylinder head temperature. This therefore simplifies mixture adjustment, protects the engine against a lean run & also make mixture less critical to weather changes. All of this together will allow higher, more consistent, power output.Please note: the Smart Carb supply must not be plugged into the battery/DSC port on your RX, please us a spare channel or Y-lead Click here to download setup instructions (JPG) Price: £25.48 £29.30 Including VAT at 15%
CSM0051 : SPARE SENSOR - CARBSMART Spare Sensor for CarbSmart Price: £4.22 £4.85 Including VAT at 15%
CSM0053 : RTV Silicone 70ml Silicon Adhesive Sealant for efficient bonding of the sensor for the Carbsmart into the head of the engine. Price: £2.96 £3.40 Including VAT at 15%
CSM0054 : O RINGS 2.5 X 1.5 (2) Replacement O-Rings for use on the Main needle on most popular 50/90 engines. When using the Carbsmart the O-rings on the main needle are subject to an increased rate of wear. Price: £1.69 £1.94 Including VAT at 15%
CSMRL10 : RevLock Governor System Revlock does not just govern or limit the RPM but accurately locks the engine to a digitally synthasised referance signal for unrivalled precision. Smooth in hovering conditions but capable of unmatched responsivity to deliver optimum use of the available engine power throughout aggressive 3D flight. Download PDF Manual Here Price: £30.43 £34.99 Including VAT at 15%
CSMRL20 : Revlock 20 Governor System New version of the CSM Revlock which now includes an engine limiter mode as well as the governor mode. This is also now programmable from your PC with the optional USB Interface. Price: £38.25 £43.99 Including VAT at 15%
CSMRL30 : Revlock 30 Governor with Collective Management Revlock 30 is the latest engine governor form CSM, this unit has built in pitch management, to help stop the head from bogging in certain manoeuvres. The amount of pitch to be removed, as well as the other parameters are all programmable via the CSM USB interface. Click here to download the Manual (PDF) Price: £46.08 £52.99 Including VAT at 15%
CSMRL40 : CSM REVLOCK 40 - Advanced G-Sensitive Collective Management Now there is no need to compromise your set-up between high-g capability and ultimate climb and flight speeds. RL40 intelligently applies collective management to give you the best of both worlds. Like its predecessor, the RL30, this governor will, when needed, limit the amount of collective pitch available to prevent excessive loss of head-speed in high-g manoeuvres. However, RL40 goes one stage further, and by incorporating an accelerometer is able to recognize low-g flight situations such as fast forward flight and vertical climbs where greater performance can be obtained by allowing more collective pitch to be employed even where this results in some loss of head speed. Price: £57.38 £65.99 Including VAT at 15%
CSMRL31 : Optional LED for RevLock 30 You are able to plug this Collective management Active LED into the Revlock 30, and this will illuminate when the RL30 is reducing the collective pitch of your heli. Price: £1.69 £1.94 Including VAT at 15%
CSMGL10 : CSM Stator Gator Revlock Although RevLock can be used with petrol/gasser engines (the manual includes instructions on how to run RevLock at lower RPM than standard), it can be difficult to find a place for the sensor, so a version to use the 'Stator Gator' sensor for gasser engines has been developed. (Sensor not included) Sensor Available From Here Price: £34.00 £39.10 Including VAT at 15%
CSMGL20 : Revlock 20 - Stator Gator Version As Above, but the RL20 version. Price: £34.77 £39.99 Including VAT at 15%
CSMRL11 : Magnet for RevLock Magnet for CSM RevLock (Each) Price: £1.69 £1.94 Including VAT at 15%
CSMRL12 : Spare Sensor for RevLock Replacement sensor for the CSM RevLock Price: £7.62 £8.76 Including VAT at 15%
CSMRL12S : Short RevLock Sensor Specially shortened hall-effect sensor, for use in machines with limited space, eg. Caliber Price: £7.61 £8.75 Including VAT at 15%
CSMRL16 : Brass Counter Weight - Revlock Brass Counter Balance for use with the CSM Revlock. Price: £1.69 £1.94 Including VAT at 15%
CSMRL19 : Sensor Bracket - Synergy/T-Rex 600 Sensor Mounting bracket for the Synergy & T-Rex 600 Nitro Price: £2.09 £2.40 Including VAT at 15%
MA040 : Throttle Jockey Rev Max A new approach to head speed control, designed for pilots who want to extract everything from their system. Price: £46.95 £53.99 Including VAT at 15%
MA-TJP : Throttle Jockey Pro New features include: Smaller, Lighter, Lower power, High frame rate Super Servo support and an integrated rpm POT for systems without a spare AUX channel. Price: £46.95 £53.99 Including VAT at 15%
MA-SENSOR : Optical Sensor - Throttle Jockey The optical sensor is an optional accessory to the Throttle Jockey. The sensor mounts directly to the brackets supplied with the Throttle Jockey. Price: £15.61 £17.95 Including VAT at 15%
MA012 : Spare Sensor - Throttle Jockey Replacement sensor for the throttle jockey. Price: £9.52 £10.95 Including VAT at 15%
MA014 : Replacement Magnets (2) - Throttle Jockey Replacement Magnets for the Throttle Jockey (2) Price: £2.39 £2.75 Including VAT at 15%
Sensor Bracket - Throttle Jockey Sensor Bracket for Throttle Jockey. Select Size Required Below Price: £2.39 £2.75 Including VAT at 15% Select Size Required MA015S : 30/50 Size MA015L : 60/90 Size
P-GV-1 : Futaba GV-1 Governor Futaba GV-1 (RPM Governor) Price: £101.73 £116.99 Including VAT at 15%
P-GV-1/MAGS - Replacement Magnets (2) Replacement magnets for the Futaba GV-1 (2) Price: £4.34 £4.99 Including VAT at 15%
P-GV-1/SENSOR : Replacement Sensor Replacment Sensor for the Futaba GV-1 Price: £26.08 £29.99 Including VAT at 15%